RainKote™ Surface Stabilizer
Base coat for adhered jacketing system
Description
RainKote™ Surface Stabilizer is a modified latex, inorganic, quick setting coating for application to select thermal insulation materials. Blue in colour, RainKote™ Surface Stabilizer allows the applicator to visually control application rates and coating consistency.
Applications
RainKote™ Surface Stabilizer provides a base for adhering facing materials to the insulation surface. Porous or dust prone surfaces are conditioned to effectively receive pressure sensitive adhesive and many latex adhesives for facing/jacketing application. Factory or field applied, RainKote™ Surface Stabilizer can also prepare a surface for paint or other specialized finishes.
Advantages
- Can be applied by brush, roller or low pressure spray equipment;
- Designed for high temperature (up to 538°C) environments;
- Excellent adhesion strength to calcium silicate, expanded perlite and cellular glass
System Design
- Outside Surface Temperature - 538°C
Wet Properties
| Density | 1.2 kg/litre |
| Solids by Weight | 35% |
Coverage
| 1.6mm thick | 0.19 m²/litre |
| 0.8mm thick | 0.38 m²/litre |
Drying Time on High Density Calcium Silicates At Room Temperature
| Set | 30 seconds |
| Handle | 15 minutes |
| Thorough Dry | 4 Hours |
| Minimum Application Temp. for Thorough Dry | 13°C |
Physical Properties
| Melt Point | Decomposes @ 587°C |
| Shore "C" Hardness - 24 Hour Cure | 65 minimum |
Fire Resistance
When applied to an inorganic, Non Combustible Material
Flame Spread - 25
Smoke Developed - 50
Available Packing
RainKote™ Surface Stabilizer is available in one, two, and five gallon pails (3.8, 7.6, 18.9 litre), and 55 gallon drum.
Storage and Application Limitations
- Do Not Store Below 35°F (2°C)
- Do Not Store Above 95°F (35°C)
- Do Not Expose to Freeze/Thaw
- If Frozen, Do Not Use
Removal from Surfaces
Immediately Use Hot Water and Soap BEFORE it Dries.
Download RainKote Datasheet
